Stink Off Foam Blaster - Universal Connection
Stink Off Foam Blaster - Universal Connection - Image 2
Stink Off Foam Blaster - Universal Connection - Image 3
Stink Off Foam Blaster - Universal Connection - Image 4
Stink Off Foam Blaster - Universal Connection - Image 5
Stink Off Foam Blaster - Universal Connection - Image 6
Stink Off Foam Blaster - Universal Connection - Image 7
In stock

Stink Off Foam Blaster – Universal Connection

$90.00

Thick foam in about a minute. The whole kit.

High-pressure foam cannon, trigger gun, two quick-connect adaptors and a microfibre wash mitt. Load it with approx. 10ml of Stink Off liquid soap, fill the remainder with water, mix it, coat the boat or the ute, let it sit, rinse it off.

✔ Fits most pressure washers with the included adaptors
✔ Adjustable foam thickness and spray pattern
✔ Wash mitt included
✔ Stink Off liquid soap sold separately

SKU: High Pressure Foam Sprayer Category:

Description

LOAD IT. FOAM IT. WALK AWAY.

A bucket and a sponge works. It also takes all afternoon, and half the time you’re just pushing salt and grit around the hull.

The Foam Blaster coats an entire boat or 4WD in thick clinging foam in about a minute. The foam sticks to vertical surfaces long enough for Stink Off to get in under the bait, mud and road film, then it rinses off and takes the lot with it. Scrub carpets where the stink is stuck before rinsing off.

What’s in the kit

  • High-pressure foam cannon with adjustable foam dial and fan nozzle
  • Trigger gun with comfortable grip and lock
  • Two quick-connect adaptors, so it fits most common pressure washers
  • Microfibre wash mitt for the panels and gelcoat that need a hand

What it’s for
Boat hulls, decks and trailers · 4WDs, utes and campers · Kayaks and paddle gear · Caravans and camper trailers · Eskies, tarps and bins · Driveways and outdoor furniture

How to use

  1. Fill the bottle with water and add Stink Off approx. 10ml.
  2. Connect the cannon to your pressure washer with the adaptor that fits.
  3. Set the foam thickness on the top dial and the spray pattern on the nozzle.
  4. Foam from the bottom up, so the foam doesn’t run over dry panels and streak.
  5. Wait a few minutes. Don’t let it dry in direct sun.
  6. Rinse from the top down, and use the mitt on anything stubborn.

Pair it with
Aniseed Ambush for the boat and the fishing gear. Lavender Knockout for the camper and the car.

Care
Run clean water through after every use and store it empty. Rinse the mitt and dry it flat.

Reviews

There are no reviews yet.

Be the first to review “Stink Off Foam Blaster – Universal Connection”

Your email address will not be published. Required fields are marked *